Thanks for the tip, Al. My preliminary ed. service manual doesn't list anything about this switch. Can you tell me about where it's located(I've heard WAY up in the dash) and what does it look like? The only thing I could find on this was that I might need to drill out the bolt hole in the switch. I saw an old post where guy said he could get the screws to cut new threads. I'm guessing it was an awkward angle(sure sounds like it would be). Much appreciated!
> Remove the seat, I did mine with the seat in place and got stuck with my
> elbows under the dash, my butt up in the air and took 20-30 minutes to
> finally get out.
> If you leave the seat, bring a cell phone with 911 on speed dial, I thought
> I was going to die in that position.
> ----- Original Message -----
> From: "brian smith" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, January 01, 2003 1:28 AM
> Subject: [ZR1] TECH: Clutch switch replacement
> > Happy hangover everyone! I'm going to continue my celebration by
> attempting to replace the clutch "safety" switch on my '91. I was hoping to
> get some pointers on the subtlty of the job. Also, if you have just
> bypassed the switch I would like to know how you did this and what I will
> need. Thanks for the help!
> > Happy New Year!!
> > Brian
> > Problems? Contact Dave Bright at: [log in to unmask]
> > TOPICS: TECH: or NONTECH:
> > http://www.zr1.net
Problems? Contact Dave Bright at: [log in to unmask]
TOPICS: TECH: or NONTECH: